r/buildapc • u/BertsonPal • 3h ago
Troubleshooting Gigabyte B650E Wifi6E Issue - No Bootable Device Found
I recently built my first PC and have been having issues getting it to work. After a bit of troubleshooting, I narrowed the issue down to the boot device tab on the BIOS, which refuses to detect both the SSD and the HDD that I have installed in my build. I've tried looking this issue up and attempted a few of the solutions I found online, but nothing I've attempted has worked.
My motherboard is a Gigabyte B650E Wifi6E, the SSD is a PNY M.2 2280 SATA (which I received a while back but never took out of the box), and the HDD is a Seagate BarraCuda ST2000DM008. To save everyone a bit of time, this is everything I've tried so far:
- Reseated both the SSD and HDD.
- Installed the driver updates for the motherboard via a USB.
- Enabled the CSM settings in the BIOS.
- Attempted to adjust the NMVe settings, but no devices were found.
- Attempted to go through with the Windows 11 installation. The setup functioned properly until getting to the installation menu when no devices were detected to install the OS onto.
- Attempted to convert drives to GPT via Command Prompt on the Windows installation, but they were not visible there either.
Every other component of the build is showing up on the BIOS properly, so I assume it's something with the drives themselves rather than the motherboard, especially since I was able to get both a standard USB and the Windows installation to work. My running theory is that there's a compatibility issue with the SSD due to its age and the HDD I received is just faulty, but I would like to make sure of this before I sink the money into replacing them.