Hola amigos, soy de Guatemala y adquirí recientemente mi cz shadow 2 or, las verdad me gusta como dispara el peso ayuda ya que es arma de competencia la limpié y lubrique y le metí 400 rondas sin un fallo de alimentación con una munición Venom 9mm de 124 grains que tenía guardada, me gusta mucho solo que aún no se le ha quitado el sonido arenoso al gatillo, y además le metí unos 100 rondas a mi carry jsjsj tuve fallos de alimentación con ella solo al principio con munición steel case pero no lo eh probado estoy a la espera de lok grips que importe para ambas y de la placa adaptadora y el red dot para mi shadow full size

And maybe some suppressor height sights

Just got my new/first hunting rifle.

6.5creed... added a 3d printed custom cheek riser. Just gotta figure out the recoil pad situation

Simple as the title is.

Bought a CZ82 2nd hand for a really good deal, and in my excitement I didn't realize the extractor, spring and pin were entirely missing. The guy I bought it from said he doesn't have it and "never fired" the gun.

The frame was cerakoted so I think what happened was it was installed incorrectly OR was forgotten entirely.

Anyone have a source or spare parts laying around? I need an extractor, extractor spring and the pin.

Yes, I already looked online on multiple sources and only found one spring available. I know the CZ82s are overall still pretty cheap but I want to avoid buying a whole other one IF possible. Thank you in advance.

Pic is of my CZ82, again I was so excited to get one cheaper than what dealers have listed so I didnt notice. This is my Pic which shows it missing 💀

All that is missing is a trigger upgrade. Anyone that has upgraded their P10 trigger, who did you go with? I'm thinking about upgrading mine. The stock trigger is pretty amazing but it is at around a 6lb break lol not much travel to the break, the break is clean no roll, great tactile reset - it's a fantastic stock trigger but I'm entertaining upgrading it.

Greetings. Im about to purchase one of these. The SP01 used to be mine, and I sold to a friend that would sell it back to me. Id already put the CGW Pro Package in it, and can buy it back from him for the $850 I sold it to him for with 6 mags. Id get the slide milled, etc to my liking.

I was about to pull the trigger (pun intended) when I discovered this at CZ Customs. Same thing -- Id need to get the slide milled, etc. I do like the idea of ditching the decocker and running SAO if needed, but can live w either one.

Would I be giving anything up either way?

Before anyone suggests just getting a Shadow 2 optics ready I've considered that, and have come to realize I really like the weight/ balance/ feel of the SP01 better than the S2.

Edit: Im not at all concerned with the Shadow not having a firing pin block. Also really what Im asking is will the trigger be better in the Shadow that in the Cajunized SP01, or would it still need to be tuned up?

Thanks!

Let’s see some 2 gun setups.

I am absolutely blown away by the CZ P-10 C Ported. I own quite a few guns and I carry one every single day. I have 3 carry guns I rotate between depending on what I’m wearing. Since fall is coming around, I wanted to get another 4” barrel sized carry gun. Something thick and chunky, but not long and hard to conceal. I’ve had my eye on the P-10 for months. Finally I pulled the trigger and let me tell you, I was immediately taken back by the performance of this gun. It was almost unreal how much less felt recoil I feel compared to my other guns with just that one small chunk port. The ergo’s fit my hand like a glove. Like it was made for my hand. When I draw from appendix, the dot naturally lands perfectly centered. It points as true as any gun I’ve ever shot. The slide pulls back smoothly even for not being totally broken in. My lord, and the trigger. The trigger out of the box before break in was crisp as could be. Probably 4.5lbs out of the box. My Glock came with a factory 8lb pull lol. I shot groups the size of a roll of duct tape from 10 yards with .7 splits my first time taking it out. I seriously was blown away by this thing. Best handgun purchase I have ever made. Now I love modding my guns and adding parts. So if you have any suggestions on how I can make this thing even more of a beast, let me know. If you’re on the fence about buying one, do yourself a favor and just get it.

No matter what I do, no matter what I buy, I keep running back to this thing. It’s unbeatable compared to anything else I own. Need to get more ammo to send out of this thing.

* featuring a UV street light.

Opinion/feedback on the Scorpion 3 Plus with the 16” barrel?

I’ll leave this picture here just for appreciation.

** UPDATE 10/21 **

I had a hard time connecting the app with the sights. Initially there was an error saying that the sights where already connected to another phone/app. I followed instructions to reset and eventually got connected.

Cool that you can have multiple Zero profiles. But there was nothing I could do to put the dot close to the center, it was locked on the right-bottom.

Created a second profile and after multiple turn off, turn on, boot the phone, pray, I was able to see the dot on a different position, and alternate between the profiles, but I still couldn't adjust the dot position, and both really off.

Then I factory reset, the sight, the app, factory zero, did that all again and boom... it is working. :)

I believe the issue is still related to the first error: this sight was previous connected to another phone/app. Probably someone at sig testing. The box came from Sig, but the seal wasn't inspiring... was just a half-glued sticker.

Picked this up a couple weeks ago. Like new, previous owner barely ran it.
Build list:
• Full CGW Cajun SAO kit
• FDE Cerakote by Black Anchor Tactical
• Slide direct milled for RMR with the low cut for an SRO
• CZ Custom barrel
• Vytal grips and basepad
• Wide paddle safeties
• Holosun 507 Comp
Running TTI +4 mags for 21 rounds. Shot my first match with it last weekend and it's still breaking in. Mags don't drop free yet and everything is tight, but it's new gun stiff, not broken stiff.
Next up is a competition magwell once I confirm basepad fitment.

I've had a Cajunized OG P-09 for a while and finally adopted a little brother for her. Since I have plenty of P-09 mags, I created a spacer to use the longer mags in the P-07.

A few days back I posted on here about wanting a CZ 457 with iron sights and threaded barrel other than the 457 scout. I had no idea about the Jaguar.
This thing is the undeniable best front porch can shooting instrument.

I’m new to CZ pistols! I purchased a CZ P10

This pistol has the hardest slide to rack that I’ve ever owned. However, a few comments referred to CZ pistols as very hard to rack until they have been fired perhaps a thousand times. Also, some have suggested a lighter spring about 13 or 14 lbs. Reading some comments has given me some good ideas about solving my problem!

I have owned Glocks and Amazon has plastic ears that attach to the back of the slide in the serrations! This solves the problem of hard racking. I can’t finding one for the CZ! Has anyone else found any for their CZ? Thanks 😊!

@minuteofaperture

Hey everyone,

I'm looking at getting a P10-C Ported in 9mm (the price is the lowest it's been in months). I shot a few rounds on my buddy's gun, and I fell in love with it immediately.

My concern however is that I've stories about the gun having a tendency to jam. Has anyone had any experiences with this happening? Or is this a problem that a few vocal people with bad experiences?

Thanks y'all!

[Edit/Update] I pulled the trigger on it! pun fully intended. Thanks for the help y'all!

My favorite holster.

For Sale! Ordered for my shadow 2 carry but doesn’t fit. Brass Palm Swell Grips, Magwell, and Mag Extension fit for the magwell. Pretty hefty set. Pretty much brand new, too much of a hassle returning it to Australia so here I am (in the states).