Does anyone have info on when the 226-X Agency is supposed to be available for purchase?

Picked up this Sig P226 Extreme a couple weeks back . Swapped out the slide for the pro cut one and added the Holosun 507C and Foxtrot 2 light today.

Picked up a hexium 556 inconel for $800 (no sales tax state) at a lgs today.I see them going for 9 so I thought it was a good deal!

Put it on a 11.5 ~$500 build with a partisan disruptor installed on it.

The faxon barrel was concentric, I shot a mag of semi and than one in frt.

It's really nice.

My first 4473 suppressor.

Waiting on hub and muzzle devices for my virtus, and this gun so I can switch over to a plan b system. I'll post a picture on it when it comes in.

Kind of a impulse buy since it was the first time I been in the lgs since 4473 was allowed.

This started out as a standard Sig 556XI rifle which was legally converted to a SBR, barrel chopped by Rack it Back Armory and cerakote work done by Weaponworks. I want to thank RIBA especially, this was a REALLY difficult gun to do a barrel chop on because Sig used a proprietary barrel nut on these and of course there are absolutely no tools available to remove and reinstall the barrel, so they made a custom tool to get the barrel out in order to turn it down. They did a super clean job, and got it cut down to 11.5 inches for me. Sig made a factory SBR as a 10 incher, but I see no disadvantage of going 11.5 here. Cerakote is Weaponwork's Sandstone Granite pattern, which I have on the mags and my EOTech cover. It's a light, handy little rifle and I can't wait to get it out to the range to shoot it.

Hey guys, I really need some advice on removing the factory flash hider on my Spear LT (.223). I cannot get this damn thing to budge at all.

I tried boiling the muzzle in water, but nothing. Left it soaking in hot water, still nothing. All that did was form some surface rust, and when I wiped it down, the finish on the barrel came right off with it.

I clamped the barrel right behind the muzzle device in custom-fit hardwood blocks and hit it with a 19mm socket on an impact wrench, but it still wouldn't give. I even tried hitting it with heat, zero luck.

I’m honestly losing my mind over here 🤣 Aside from stripping the barrel finish, nothing has changed. Thing is still stuck like it's welded on. :(

Current Build:

TXG medium grip module

320x FCU with flat legion trigger

320 stock slide

Zaf fluted threaded barrel

Tungsten grip weight from SS

Steel guide rod 1911 style- sig guy (shoutout to sig guy for amazing communication and order processing)

16 pound recoil spring 1911 style - sig guy

Sig Sauer Romeo 1 pro red dot 3 moa

Agency Arms Untreated aluminum magwell

Herrington arms XL compensator

surefire x300

Talon grip

Strike Industries Extended Mag Plates

Im looking to get my rattler as short as possible with a suppressor mounted. I order comstock RPA but the “ears” on the rattler gas regulator extend forward and prevent the RPA from seating all the way down the muzzle device. I’ve considered milling it down but figured someone might make one thats already shortened ?

P226 Legion SAO

The EDC and the Home Defense after a good bath and lube.

I’m looking pretty hard at the P365X for carry and would like to hear from people who have put some real time and rounds through one. I don’t really plan on making any modifications, as I prefer to keep my carry guns stock.

For those carrying one, how has reliability been? Any issues with the trigger return spring or other parts as the round count gets higher? I’d especially like to hear from anyone with several thousand rounds through theirs.

Has anyone compared the P365X directly with the HK CC9? Curious about recoil, shootability, trigger, and which you ultimately preferred.

With the endless amount of P365 variants at this point, what made you choose the X specifically instead of the standard P365, XL, XMacro, etc.?

I’m also looking at the ROMEO-X Enclosed Compact and ROMEO-X SIG-LOC Compact. Anyone running either one? Any issues, preferences, or other optic recommendations?

Basically looking for long-term P365X experiences—the good, bad, and anything you wish you knew before buying.

Planning to upgrade the grip on my P365X and for $60 this looks great. I have heard 365XL grips fit 365X, but before i order i just want to confirm if this will fit. It does say it will take 17 rd mags but mine is only 12. Will i need to buy new mags? Just want to be sure it will work before i spend money

What’s the best setup for the x5l? Looking for as little pre and post travel as possible, Light crisp break, short forcefull reset

Sig Romeo + Juliet on M400 Tread V2 and will soon have a Hexium Ti added. Switching to FDE foregrip and getting an FDE cover for hexium.

Hey guys,

I'm trying to source a replacement for the dual recoil spring system (SIG MCX Operating Springs Assembly) for my 5.5" Gen 1 MCX Rattler (300 BLK). My serial number has a 63J prefix, but it's a standard Gen 1 platform with NO ambi bolt release on the right side.

The official SIG part number should be KIT-MCX-RECOIL-RATTLER, but I can't find it in stock anywhere online.

I live in Italy, and our local distribution network is currently changing, making it extremely hard to track down parts. I am ready to purchase it from a US retailer or order it through a proxy if needed, but I can't even find an online store that has it available.

Are you guys experiencing a shortage of these Gen 1 Rattler spring assemblies in the US as well? Does anyone know of a specific vendor or site that currently has them in stock or accepts orders for them?

Any help or lead would be greatly appreciated. Thanks!

Picked this beaut up about 3 weeks ago, and have finished up with add ons as of today. Needless to say I’m in love.

Vortex Defender ST
HLX Sub
Lok grips
CRS carry magwell
(Not pictured) GT Holsters IWB setup.

If you’re considering the full size or carry size 226X, just do it. You won’t regret it.

I picked up a gem today from a local shop I traded a cz 97b and snagged a Sig P220 Elite Match stainless in 45 acp.. interestingly this ine has a german made frame. I've never seen these in the wild, I've only seen them online. Has anyone on the group shot one of these what did yiu think of it?

I just saw a guns for cash advertisement for my area where they're giving you $500 for each operable pistol or assault rifle you turn in. I'm assuming that my P320s are not worth much if anything on trade to a dealer for a new gun. Does it make sense to just trade them in to a guns for cash if I don't use them anymore?

What’s the OEM guide rod on a P220 .45 ACP Legion? Is it a stainless rod? Is it a captured spring?

Just curious thanks!

Threw mine out, having issues with my GG trigger not resetting (live fire only) sig wont touch it since its "modified" so trying to return it to stock to see if issue corrects itself or at least then Sig will help. It is a newer model with 2 holes if that helps and its curved.

SIG 556 w/ viper pst 1-6 LPVO